Done Right
Appliance Repair
📞 Call Now
Appliance Repair
If your Samsung dryer is running but not producing heat, the most likely cause is a failed heating element. It is one of the most common Samsung dryer repairs we perform in Keller and the surrounding DFW area — and in most cases, we can fix it the same day you call.
This guide covers exactly what a heating element replacement includes, what the repair costs, how long it takes, and what signs point to this specific problem versus other potential causes.
A failed heating element produces a very specific set of symptoms. Here is what to look for:
Quick test: Start the dryer on the highest heat setting. After 5 minutes, open the door carefully. If the drum interior is not warm to the touch, the heating element has likely failed and should be replaced by a professional.
Heating elements fail for several reasons, and identifying the root cause matters — because replacing the element without addressing the underlying issue can lead to premature failure of the new part.
Important: If lint buildup caused your element to fail, we clean the interior of your dryer as part of the repair. Skipping this step means the new element may fail again within months.
When we replace a Samsung dryer heating element in Keller, here is exactly what the repair includes:
The $290 price covers a complete repair — not just the part swap. We use OEM (original equipment manufacturer) Samsung parts, which carry a longer lifespan than aftermarket alternatives.
Aftermarket heating elements are widely available for $15–40 online. We do not use them, and here is why:
One of the most overlooked aspects of dryer maintenance is internal lint accumulation. Your lint trap only catches a portion of the lint produced during drying — the rest gets past the trap and accumulates inside the dryer cabinet, around the heating element housing, and in the exhaust duct.
When we access the interior to replace the heating element, we clean:
Safety note: Lint buildup around a heating element is a genuine fire hazard. The U.S. Fire Administration estimates that dryers cause approximately 2,900 home fires per year — the leading cause is failure to clean. Our cleaning step is not just about dryer performance — it is about your family's safety.
As part of every dryer repair, we inspect the exhaust vent from the dryer connection to the exterior wall cap. A clogged or kinked vent is one of the top causes of:
If we find a significant blockage, we will let you know and provide an estimate for vent cleaning separately. Minor restrictions are addressed as part of the standard repair.
A Samsung dryer heating element replacement typically takes 45 to 90 minutes on-site. We carry the most common Samsung heating elements in our service vehicle, which means we can complete the repair on the first visit in most cases.
After installation, we run a full test cycle to confirm proper heat output before leaving your home.
Same-day service available. $290 flat price includes OEM part, cleaning, vent check, and warranty.
📞 Call (682) 304-9704This is the most common question we get. Here is a straightforward breakdown:
We repair heating elements on all Samsung dryer models, including:
If you are not sure which model you have, call us — we can identify it by the serial number and confirm part availability before scheduling.
$290 flat price at Done Right Appliance Repair. This includes the OEM heating element, labor, interior drum cleaning, vent inspection, and a parts & labor warranty. No hidden fees.
Key signs: dryer runs but produces no heat, clothes come out damp after a full cycle, dryer takes 2–3 cycles to dry one load, or the drum feels room temperature during operation. A technician can confirm with a multimeter test on the element.
45–90 minutes in most cases. We carry common Samsung parts and complete the repair on the first visit. We run a full test cycle before leaving.
Yes — same-day service is available in Keller most days. Call before noon for the best chance of a same-day appointment. We offer 2-hour arrival windows so you are not waiting all day.
Yes. All repairs include a parts and labor warranty. If the heating element fails or the same issue returns, we come back at no additional charge.
Yes — it is one of the most common causes. Lint accumulation around the heating element causes it to overheat and burn out prematurely. That is why we include interior cleaning with every heating element replacement.